主要特点:
1.Housings are completely sealed—IP66 and NEMA 4X rated
2.Washdown drive is easy-to-clean and resistant to commonly used cleaning and sanitizing solutions—simply hose down to clean
3.Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
4.Full remote control capabilities allow easy integration into automated processes
5.Flow rate: 0.006 to 3400 mL/min (up to 54 GPH) with L/S tubing. Flow rate depends on drive rpm and tubing size
6.Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually
7.Menu-driven interface lets you select one of seven languages for programming and operation
8.Dispense by: Volume—in milliliters (0.001 to 99999 mL), liters, and gallons; Copy—1 to 9,999 dispense cycles; or SEC—time interval between each dispense cycle (1 sec to 99 hr, 59 min, 59 sec)
Remote control via sealed circular connector on drive:
--Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V;
--Pumping direction requires open collector or contact closure;
--Start/stop/purge requires open collector or contact closure;
--Tachometer output scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector
9.Model 77975-25 features a 316 stainless steel housing. Use this drive in process, manufacturing, pharmaceutical, dairy, biotech, and food and beverage applications.
77975-20\77975-30产品特点:
1.无刷、免维护马达,IP66防护等级,NEMA 4X级别,316不锈钢材质机身,键盘全密封,防水防尘,耐化学品腐蚀,可直接用水、消毒液冲洗整台泵
2.LED显示:流速、转速、分配体积、累计分配体积、重复分配次数、分配时间间隔,触摸上下键调节,可正反方向运行(运行前后可清洗泵管),键盘锁定功能,驱动器可储存一组个尺寸泵管流速的校正值,即使关闭电源也不会丢失
3.转速:0.1-600rpm
4.转速精度:±0.1%
5.设定体积分配,可选择单位毫升、升、加仑,1-99999之间任意数值
6.设定重复操作次数:1-99999次之间任意数值
7.每2次运行的间隔时间:99小时59分钟59秒之内任意数值
8.信号控制:0-20ma、4-20ma、0-10V
9.15、24、35号为厚壁泵管,有更强的吸力,适合高粘度液体
10.IP66防水等级
11.ISO9001:2000认证,ETL、CE标准
12.电源:90-260V,1.1A
13.外部尺寸(长宽高,cm):30.5×22.9×23.6
77975-20蠕动泵流量表:
泵管尺寸:内径×外径×壁厚(mm) | 流量表(ml/min) |
15号,4.8×9.6×2.4 | 0.17-1000 |
24号,6.4×11.1×2.4 | 0.28-1700 |
35号,8×12.7×2.4 | 0.38-2300 |
36号,9.6×14.4×2.4 | 0.48-2900 |
使用36号管高压力泵头 | 0.57-3400 |
货号 | 产品描述 |
07575-10 | 美国Masterflex L/S蠕动泵(不含泵头泵管) |
07575-82 | 手柄控制开关,1.8米连接线 |
07575-84 | 洗脚踏开关,脚踩控制泵开/关,1.8米连接线 |
07575-80 | 远程控制连接线,7.3米 |
07575-01 | 备用件,包含轴封、硬件、密封圈 |
完整蠕动泵系统货号 | |
77975-20 | 美国Masterflex L/S蠕动泵系统,流量0.28-1700ml/min |
77975-30 | 美国Masterflex L/S蠕动泵系统,流量0.28-1700ml/min |
一套完整的蠕动泵系统包括: